Guidewires
Traxcess Docking Wire
A long, thin, sterile wire designed to provide the necessary length to allow the exchange of a catheter, or other interventional device, while maintaining the intravascular position of the catheter guidewire during an interventional procedure in the peripheral vasculature. It is typically made of polymer-coated [e.g., polytetrafluoroethylene (PTFE)] stainless steel and is supplied with a connector (e.g., self-locking taper) to facilitate its joining to the proximal end of the in situ guidewire to create the extension (e.g., 150 mm). After the catheter exchange, the guidewire extension can be detached and the guidewire used as intended. This is a single-use device.
Contact Microvention, Inc. ↗ Where to buy Compare similar devices
Find similar guidewires
Where to buy Traxcess Docking Wire
Contact Microvention, Inc. directly; they can quote, ship, or point you to the distributor for your country.
From terumoneuro.com, checked October 2026.
No reply, or outside their markets? Send us a request and we route it to a rep or distributor for your country.
Traxcess Docking Wire models and sizes
From the FDA Global Unique Device Identification Database. Confirm with the manufacturer's instructions for use.
| Model / catalog no. | Size | MRI | Status |
|---|---|---|---|
| GW14100EX | — | MR Conditional | Available |
FDA clearances
- 510(k) K093647 February 2010
Procedures that use guidewires
Frequently asked questions
What is Traxcess Docking Wire used for?
A long, thin, sterile wire designed to provide the necessary length to allow the exchange of a catheter, or other interventional device, while maintaining the intravascular position of the catheter guidewire during an interventional procedure in the peripheral vasculature. It is typically made of polymer-coated [e.g., polytetrafluoroethylene (PTFE)] stainless steel and is supplied with a connector (e.g., self-locking taper) to facilitate its joining to the proximal end of the in situ guidewire to create the extension (e.g., 150 mm). After the catheter exchange, the guidewire extension can be detached and the guidewire used as intended. This is a single-use device.
Who makes Traxcess Docking Wire?
Traxcess Docking Wire is made by Microvention, Inc.. It is listed under guidewires in our device library.
What sizes does Traxcess Docking Wire come in?
The FDA device database does not list sizes for Traxcess Docking Wire. Check the instructions for use or ask a Microvention, Inc. representative.
Is Traxcess Docking Wire MRI safe?
The FDA device database lists Traxcess Docking Wire as MR Conditional. Always follow the specific MRI conditions in the labeling.
Is Traxcess Docking Wire FDA cleared?
Traxcess Docking Wire is covered by FDA submission K093647.
How do I contact a Microvention, Inc. sales representative?
Microvention, Inc. has not listed representatives on LA Vascular yet. Visit the Microvention, Inc. company page for contact details.
Models, sizes and MRI status come from the FDA Global Unique Device Identification Database (GUDID); descriptions marked "provided by the manufacturer" are reviewed before publishing. Not an endorsement; follow the manufacturer's instructions for use.