Embolic protection
GORE Embolic Filter
by W. L. Gore & Associates, Inc.
A steerable wire with a filter at its distal end intended to be used to facilitate the placement of diagnostic/interventional vascular devices (e.g., angioplasty balloons, intravascular stents) in the lumen of a blood vessel (coronary, carotid, peripheral), and to provide embolic protection by capturing emboli that may result from the procedure. The filter is deployable (expandable) once inserted distal to the vascular lesion (e.g., atherosclerotic plaque). It typically includes devices for introduction/removal of the guidewire (e.g., deployment/removal sheath), which are not intended to be used as working channels for other interventional devices. This is a single-use device.
Contact W. L. Gore & Associates, Inc. ↗ Where to buy Compare similar devices
Where to buy GORE Embolic Filter
Contact W. L. Gore & Associates, Inc. directly; they can quote, ship, or point you to the distributor for your country.
From gore.com, checked October 2026.
No reply, or outside their markets? Send us a request and we route it to a rep or distributor for your country.
GORE Embolic Filter models and sizes
From the FDA Global Unique Device Identification Database. Confirm with the manufacturer's instructions for use.
| Model / catalog no. | Size | MRI | Status |
|---|---|---|---|
| GEFA015185 | Length 185 cm; Outer Diameter 5 mm | Not stated | Available |
| GEFA015300 | Outer Diameter 5 mm; Length 300 cm | Not stated | Available |
| GEFA017185 | Outer Diameter 7 mm; Length 185 cm | Not stated | Available |
| GEFA017300 | Outer Diameter 7 mm; Length 300 cm | Not stated | Available |
Procedures that use embolic protection
Frequently asked questions
What is GORE Embolic Filter used for?
A steerable wire with a filter at its distal end intended to be used to facilitate the placement of diagnostic/interventional vascular devices (e.g., angioplasty balloons, intravascular stents) in the lumen of a blood vessel (coronary, carotid, peripheral), and to provide embolic protection by capturing emboli that may result from the procedure. The filter is deployable (expandable) once inserted distal to the vascular lesion (e.g., atherosclerotic plaque). It typically includes devices for introduction/removal of the guidewire (e.g., deployment/removal sheath), which are not intended to be used as working channels for other interventional devices. This is a single-use device.
Who makes GORE Embolic Filter?
GORE Embolic Filter is made by W. L. Gore & Associates, Inc.. It is listed under embolic protection devices in our device library.
What sizes does GORE Embolic Filter come in?
Sizes listed for GORE Embolic Filter: Length: 185–300 cm; Outer Diameter: 5–7 mm. Confirm availability with the manufacturer's instructions for use.
Is GORE Embolic Filter MRI safe?
The FDA device database entry for GORE Embolic Filter does not state its MRI safety status. Check the labeling before MRI.
Is GORE Embolic Filter FDA cleared?
GORE Embolic Filter is registered in the FDA's Global Unique Device Identification Database (GUDID).
How do I contact a W. L. Gore & Associates, Inc. sales representative?
W. L. Gore & Associates, Inc. has not listed representatives on LA Vascular yet. Visit the W. L. Gore & Associates, Inc. company page for contact details.
Models, sizes and MRI status come from the FDA Global Unique Device Identification Database (GUDID); descriptions marked "provided by the manufacturer" are reviewed before publishing. Not an endorsement; follow the manufacturer's instructions for use.