Biliary drains
Biliary Plastic Stent Introducer
by Micro-Tech (Nanjing) Co., Ltd.
A flexible tube intended for percutaneous placement in the abdomen to establish a channel for temporary or prolonged drainage of an obstructed biliary tract, for splinting of the bile duct during healing, or for preventing stricture of the bile duct. It is distally inserted into the common bile duct, hepatic ducts (transhepatic biliary drainage), or gallbladder (cholecystostomy drainage); disposable devices dedicated to drain introduction may be included with the device. It may be used in conjunction with a low negative pressure system and is available in various designs (e.g., silicone Y- or T-tube, catheter-like, with perforations). This is a single-use device.
Find similar biliary stents
Where to buy Biliary Plastic Stent Introducer
We do not have contact details for Micro-Tech (Nanjing) Co., Ltd. yet. Send a request and we will route it to the right person for your country.
Biliary Plastic Stent Introducer models and sizes
From the FDA Global Unique Device Identification Database. Confirm with the manufacturer's instructions for use.
| Model / catalog no. | Size | MRI | Status |
|---|---|---|---|
| BPDI-0700/17 | Outer Diameter 2.35 mm; Length 170 cm | Not stated | Available |
| BPDI-0840/22 | Outer Diameter 2.9 mm; Length 220 cm | Not stated | Available |
| BPDI-1040/22 | Outer Diameter 3.3 mm; Length 220 cm | Not stated | Available |
| BPDI-1140/22 | Outer Diameter 3.8 mm; Length 220 cm | Not stated | Available |
FDA clearances
- 510(k) K230127 September 2023
Procedures that use biliary drains
Frequently asked questions
What is Biliary Plastic Stent Introducer used for?
A flexible tube intended for percutaneous placement in the abdomen to establish a channel for temporary or prolonged drainage of an obstructed biliary tract, for splinting of the bile duct during healing, or for preventing stricture of the bile duct. It is distally inserted into the common bile duct, hepatic ducts (transhepatic biliary drainage), or gallbladder (cholecystostomy drainage); disposable devices dedicated to drain introduction may be included with the device. It may be used in conjunction with a low negative pressure system and is available in various designs (e.g., silicone Y- or T-tube, catheter-like, with perforations). This is a single-use device.
Who makes Biliary Plastic Stent Introducer?
Biliary Plastic Stent Introducer is made by Micro-Tech (Nanjing) Co., Ltd.. It is listed under biliary drainage catheters in our device library.
What sizes does Biliary Plastic Stent Introducer come in?
Sizes listed for Biliary Plastic Stent Introducer: Outer Diameter: 2.35–3.8 mm; Length: 170–220 cm. Confirm availability with the manufacturer's instructions for use.
Is Biliary Plastic Stent Introducer MRI safe?
The FDA device database entry for Biliary Plastic Stent Introducer does not state its MRI safety status. Check the labeling before MRI.
Is Biliary Plastic Stent Introducer FDA cleared?
Biliary Plastic Stent Introducer is covered by FDA submission K230127.
How do I contact a Micro-Tech (Nanjing) Co., Ltd. sales representative?
Micro-Tech (Nanjing) Co., Ltd. has not listed representatives on LA Vascular yet. Visit the Micro-Tech (Nanjing) Co., Ltd. company page for contact details.
Models, sizes and MRI status come from the FDA Global Unique Device Identification Database (GUDID); descriptions marked "provided by the manufacturer" are reviewed before publishing. Not an endorsement; follow the manufacturer's instructions for use.